تبلیغات متنی
چاپ پرچم
آزمون علوم پایه دامپزشکی
ماسک سه لایه
Hookah Shisha Tobacco
مربی سگ
خرید از چین
home theater in Los Angeles
گاوصندوق
Barabas Ropa de hombre
مبلمان اداری کلاسیک
گاوصندوق
مبلمان اداری کلاسیک
لوازم تاتو
فروشگاه مکمل های غذایی
مبلمان اداری کلاسیک
میز اداری مدرن
گاوصندوق خانگی
ارسال اس ام اس انبوه
میز مدیریتی سلطنتی
خرید بک لینک قوی
نردبان خانگی
صندلی نیلپر
تورآنتالیا
خرید ملک در ازمیر
صندلی اداری گلدسیت
قیمت لوله استیل
میز اداری مدرن
تجهیز صنعت
Direct Flow Meter for Weighing of Tungsten Carbide

thomaschap

thomaschap

Direct Flow Meter for Weighing of Tungsten Carbide

The C-Lever direct system is installed and operating in the Schöndorfer GmbH’s dolomite plant in Jettenberg, Austria. Their requirements were based on the exact dosage of dolomite tungsten carbide powder Hard Rock Drill Bits on a conveyor – at a mere flow rate of 300 up to 500 kg/h. The structural requirements basically didn’t permit an installation at normal height. With a minor height of just 670 millimetres, the C-Lever direct 12 PRE stood the test. Despite extreme dust development, further dedusting within the device itself could be waived. Stability was achieved through tungsten carbide coating that is applied to the gravimetric slide sensor during a thermal spray process. Tungsten carbide products are characterised by its very high wear resistance.

With tungsten carbide's coated gravimetric slide, the C-Lever direct accurately and consistently measures the ground dolomite rocks. Through this measured value, the customer is now capable of adjusting the flow capacity to the conveyor. The conveyor’s effective use now lies Mining Drilling Tools at 100 percent and isn’t overloaded.

Rembe says that, besides high accuracy, flexibility, simple integration and handling, their measuring system offers high process safety. This would be guaranteed by a patent-pending, friction-free measurement of the centripetal force. Compared to other bulk flow meters, the C-Lever gravimetrically measures the product stream at the sensor, in other words, without any mechanical components such as rotary belts, bearing or other moving parts. The concentric drill bits manufacturer claims that this results in a substantial improvement of the current industrial standards of up to ± 0.2 percent at a turn-down ratio of 20:1 on the measuring range. Even minor flow rates of under 100 kg/h can be linearly measured. The C-Lever recognises and compensates various influences on the bulk flow, thus, measuring is not influenced by the numerous variable factors arising during the process. The steeply mounted gravimetric slide sensors prevent the product’s adhesion, which eliminates the zeropoint shift as a source of error. Elaborate pneumatic dedusting becomes history.


http://arthuredwi.mee.nu/4_things_to_consider_before_purchasing_a_honda_two

موضوع :
برچسب ها : ,
امتیاز : 3 | نظر شما : 1 2 3 4 5 6
+ نوشته شده در جمعه 10 ارديبهشت 1400ساعت 10:13 توسط thomaschap | تعداد بازديد : 21 | |